loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Face Drill Rig (jumbo) WD581

5 0 Reviews
Face drill rig WD581 is small in overall size, simple in operation, strong in mobility, high in operating efficiency and highly intelligent, and is suitable for non-coal mine excavation with a section of   9m²-35m² Drilling and bolt hole construction.
Availability:
Quantity:


DOWNLOAD

FACE DRILL RIG WD581TECHNICAL SPECIFICATION.pdf


Main technical features:

1. Easy: Electric proportional hydraulic control, compared with full hydraulic control, the operation is simpler, and the drilling positioning is more convenient, flexible and accurate.

2. Efficient: It has the functions of automatic drilling, automatic retraction, automatic anti-jamming, automatic stop impact, etc., which can effectively improve the drilling efficiency and prolong the service life of the drilling tool.

3. Intelligence: Digitally record data such as the number of drilling holes, drilling depth, etc., and make statistical records of the construction situation in real time.

4. Safety: Equipped with self-defense ceiling and safety voice alarm system, real-time monitoring and fault detection, and voice broadcast, in line with the requirements of intelligent mine construction specifications.

5. Flexibility: Adopt articulated chassis, small overall size, four-wheel drive, strong power, and realize flexible, fast and safe driving in roadways.

6. Durable: The structure is solid and durable, easy to maintain, and can effectively reduce the cost of use.


TECHNICAL SPECIFICATIONS

ROCK DRILL


Mode

1838ME

Electrical proportional hydraulic control system

Bitshank

T38

Automatic anti-sticking

Helght from top to rotating center

95mm

Automatic drilling, automatic retraction, automatic termination of impact; no impact without water and lubrication

Length(excluding bit shank)

1008mm

Automatic recording of the drilling depth and number of holes drilled

Impact power

18KW

Control system

Impact frequency

60HZ

Electrical proportional hydraulic control system

Rated pressure of hydraulic system

210bar

Electrical system

Max. pressure of hydraulic system

230bar

Total installed power

62KW

Rotating system

Independent rotation

Main motor

1×55kw

Rotating speed

0 ~ 215rpm

Voltage

380v

Rotating torque (Max.)

1000Nm

Frequency

50HZ

Weight

170kg

Starting mode

Star/Delta

Noise level

<106dB(A)

Motor overheat protection

Available

Propulsion beam      

Type A Standard    

TypeB Optional

Type C Optional


Total length

5873mm

5268mm

4658mm

Drill pipe length

4305mm

3700mm

3090mm

Drilling depth

3960mm

3410mm

2800mm

Weight (including rock drill)

640kg

611kg

576kg

Propulsion

7kn-15kn

7kn-15kn

7kn-15kn

Air system

Hydraulic system

Working pressure

0.8MPa

Hydraulic pump unit

lset

Working flow

410L/min

Pump unloading and start

Available

Drill arm

Max. system pressure

23Mpa

Telescopic stroke

1250mm

Max. capacity of hydraulic oil tank

240L

Swing

±35°

Low oil level indicator

1set

Water supply system

Manual refilling pump

1set

Working pressure

1MPa-2MPa

Return oil filtering blockage alarm

1set

Working flow

40L/min-120L/min

Water cooler of hydraulic oil

1set

Chassis


Mineral based hydraulic oil

1set

66kw diesel engine

lset

Approach angle

19°

Articulated steering

Rota fing angle±38

Departure angle

18°

Muffler

lset

Horn and signal lamp

Available


Fixed driving seat with safety belt

lset

Capacity of fuel tank

85L

Four-wheel drive

lset

Electrical system

24V


Hydraulic torque converter

lset

Battery

1x120Ah


Transmission

lset

Service lamp

2x100W,4x48W,switched on/offindependently


Front axle (including fully enclosed multi-disc wet hydraulic brake and parking brake)  

lset

Working lamp

2x100W,4x48W,switched on/offindependently


Rear axle (including fully enclosed multi-disc wet hydraulic brake)  

lset

Level

Available

Tyre

8.25-20

Fire extinguisher

Available



Previous: 
Next: 

Related Products

Leave a Message
Contact Us

Quick Links

Contact Us
  Email: 
tunnel@unirocgroup.com
 Address: 
No. 18-1 Panpan Road, Economic and Technological Development Zone, Changsha City, Hunan Province, China
Newsletter
If you are interested in our products, please leave your email and we will contact you.
 Copyright © 2022 Hunan Wuxin Tunnel Intelligent Equipment Co., Ltd. All Rights Reserved.