Bridge Equipment
Bridge Precast Concrete Production Line (In-mold Steam Curing)
Girder Prefabrication Efficiency Revolution Solution: A single production line can steadily produce 4 girders per day.
Land & Labor Saving
Compact layout — saves 30-50% of occupied area compared to conventional production lines; High automation — reduces labor costs significantly
Multi-girder Compatibility
Quick switching between precast girder types via mold replacement, supporting diversified bridge precasting tasks
Fast Pedestal Turnover
Direct in-mold steam curing reduces the casting station time to just 3 hours and the curing station time to 15 hours, achieving a 4× increase in turnover rate compared to conventional lines.
Weather-Independent
Indoor enclosed production line enables stable and efficient manufacturing even in winter
Equipment Technical Parameter
Type | Name | Technical Parameters | |
|---|---|---|---|
Parameter | Value | ||
Concrete Conveying & Distribution System | Concrete Conveying System | Capacity | 3 m³ |
Max. Gradeability | 2.5% | ||
Travelling Speed | 0-60 m/min | ||
Concrete Distribution System | Number of Distributor Gates | 4 | |
Distributor Outlet Lifting Stroke | 0.7m | ||
Concrete Discharge Rate of Distributor | 0.5-2 m³/min | ||
Travelling Speed of Distributor | 0-25 m/min | ||
Circulating Precast Girder Transfer Shuttle | Hydraulic Formwork System | Panel Material | 201 Stainless Steel / Q235 |
Synchronization Accuracy | ±3 mm | ||
Attached Vibrator System | Vibration Frequency | 0-200 Hz | |
Travelling Speed | 0-9 m/min | ||
In-Mold Movable Pedestal | Power Supply | Battery | |
Max. Gradeability | 1% | ||
Steam Curing System | Steam Curing Chamber | Thermal Insulation Material | 75mm Silica Insulation Board |
Temperature Control Accuracy | ±1℃ | ||
Steam Curing Equipment | Curing Mode | Steam Generator / Air-source Heat Pump | |
Transverse Transfer Shuttle System | Transverse Transfer Shuttle | Travelling Speed of the Shuttle | 0-9 m/min |
Power Supply | Drag Chain | ||
Bridge Precast Concrete Production Line (In-mold Steam Curing)
